Here >> List > Aerator > Rubber Membrane Microporous Aerator
>>Rubber Membrane Aerator
>About
A new type aerator was studied since 80s,as small diameter of air bubble that diffuse equably, plenteous areas and corrosion resistance. Specially to adapt to Wastewater treatment plants and large factories for rebuilding new or old aeration tanks.This type has two categories:the plane form and the spherical.In addition to adjustable-bracket of pipe ensure to horizontal and the best aeration effect.
>Spec
| Photo（from three directions,click to magnify） |
Product Parameter |
Technical Parameter（Unit） |
 
  |
Type |
XJBQ-192Q |
Service Area:0.25-0.55m2
Membrane Aperture:80-100micron
Air Flow:1.5-3m3/h
Oxygen Utilization Rate(Under-Water3.2m):18.4-27.7%
Aeration Intensity:0.112-0.185KgO2/m3h
Power Efficiency:4.46-5.19KgO2/kwh |
| Spec |
Æ192mm |
| Shape |
Spherical,Internal Thread |
| Material |
Rubber+ABS |
| Weight |
245g |
 
  |
Type |
XJBQ-215P |
Service Area:0.25-0.55m2/
Membrane Aperture:80-100micron
Air Flow:1.5-3m3/h
Oxygen Utilization Rate(Under-Water3.2m):18.4-27.7%
Aeration Intensity:0.112-0.185KgO2/m3h
Power Efficiency:4.46-5.19kgO2/kwh |
| Spec |
Æ215mm |
| Shape |
Plane,Exterior Thread |
| Material |
Rubber+ABS |
| Weight |
476g |
 
  |
Type |
XJBQ-215Q |
Service Area:0.25-0.55m2
Membrane Aperture:80-100micron
Air Flow:1.5-3m3/h.个
Oxygen Utilization Rate(Under-Water3.2m):18.4-27.7%
Aeration Intensity:0.112-0.185KgO2/m3h
Power Efficiency:4.46-5.19KgO2/kwh |
| Spec |
Æ215mm |
| Shape |
Spherical,Exterior Thread |
| Material |
Rubber+ABS |
| Weight |
477g |
 
  |
Type |
XJBQ-260P |
Service Area:0.35-0.752
Membrane Aperture:80-100micron
Air Flow:1.5-33/h
Oxygen Utilization Rate(Under-Water3.2m):18.4-27.7%
Aeration Intensity:0.112-0.185KgO2/m3h
Power Efficiency:4.46-5.19kgO2/kwh |
| Spec |
Æ260mm |
| Shape |
Plane,Exterior Thread |
| Material |
Rubber+ABS |
| Weight |
867g |
 
  |
Type |
XJBQ-260Q |
Service Area:0.35-0.75m2/
Membrane Aperture:80-100micron
Air Flow:1.5-3m3/h.个
Oxygen Utilization Rate(Under-Water3.2m):18.4-27.7%
Aeration Intensity:0.112-0.185KgO2/m3h
Power Efficiency:4.46-5.19kgO2/kwh |
| Spec |
Æ260mm |
| Shape |
Spherical,Internal Thread |
| Material |
Rubber+ABS |
| Weight |
1016g |
 
  |
Type |
XJBQ-300Q |
Service Area:0.35-0.752
Membrane Aperture:80-100micron
Air Flow:2.5-4m3/h
Oxygen Utilization Rate(Under-Water3.2m):18.4-27.7%
Aeration Intensity:0.112-0.185KgO2/m3h
Power Efficiency:4.46-5.19kgO2/kwh |
| Spec |
Æ300mm |
| Shape |
Spherical,Internal Thread |
| Material |
Rubber+ABS |
| Weight |
1210g |
>Installation Drawing
(click to magnify)
>Installation
The aeration installation is composed by aerator,pipe,three direct links,four direct links,elbow,adjustable-bracket of pipe and annectent etc..Dispose ring-shaped pipe and aerator equably according to air flow and tank form.The aerators connect with pipe from ABS- Gluewater or screw thread. First，fix adjustable-bracket to the bottom of the tank by screw,then fix the pipe to the adjustable-bracket by nylon ribbon.
>Order Instruction
Apprise us the spec,type and number.
